Products from Tönsfeldt
Tönsfeldt Modellbau Vertrieb is the right one, if you are searching for RC storage technology, packaging and fire extinguishers.
No results were found for the filter!
Tönsfeldt 100050 TMV mast adjustment for the... Product number: 37453
Description: The TMV mast adjustment is designed as a technically clean solution for mast tilting in Robbe's Linde H50 forklift. Tilting using a micro servo - as implemented in the original kit - has several disadvantages: Due to the...
89.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Tönsfeldt 030166 TMV control chain for... Product number: 37468
New at Tönsfeldt Modellbau - Vertrieb are the attack chains load hooks with a view against slipping out of the attacks, for a safe loading of heavy loading with the construction machine. Standard length of the chain is 6.2 cm special...
17.20€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Tönsfeldt 030177 control chain for construction... Product number: 37480
New at Tönsfeldt Modellbau - Vertrieb are the stop chains load hooks with a view against slipping out of the attacks with vertebrae, for a safe loading of heavy loading with the construction machine. Standard length of the chain is 5.0...
22.30€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Tönsfeldt 020533 2 worm wheels for Robbe... Product number: 37451
2 TMV worm gears for the Robbe forklift H50 for exchange. Part no. 10.6 from the assembly instructions step 10 page 22. Made of brass.
Content 2 Stück (14.95€ * / 1 Stück)
29.90€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Tönsfeldt 030168 TMV control chain for... Product number: 37470
New at Tönsfeldt Modellbau - Vertrieb are the attack chains load hooks with a view against slipping out of the attacks, for a safe loading of heavy loading with the construction machine. Standard length of the chain is 6.2 cm special...
17.20€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 020534 2 threaded rods for Robbe... Product number: 37452
TMV 2 threaded rods for the Robbe forklift H50, Robbe part no. 10.5. From the assembly instructions, step 10, page 22. Turned from steel, hardened and coated in black to prevent rust.
Content 2 Stück (11.40€ * / 1 Stück)
22.80€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 020550N TMV set forklift tines... Product number: 37454
Short forks for the Thicon-Lesu forklift from the 3D printer. The TMV forks are made of alumides and very flexible, but also unbreakable in normal handling. The TMV forklifts are narrower, thinner and a little longer than the originals...
Content 2 Stück (29.95€ * / 1 Stück)
59.90€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 020551N TMV set forklift tines... Product number: 37455
Medium long forks for the Thicon-Lesu forklift truck from the 3D printer. The TMV forks are made of alumides and very flexible but also unbreakable in normal handling. On the TMV forks, two European batches fit across (for fastest...
Content 2 Stück (30.95€ * / 1 Stück)
61.90€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 020510GS TMV Towing device forklift... Product number: 37457
Towing device forklift trailer with long lever
9.90€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 030451 Product number: 37458
TMV eye screw for Wedico-Model's low loader Art. No. 3-W & Art. No. 13-w. The eye screw is used as a replacement for the M3 x 20 screw on the side with the sleeve so that the stop point can arise. You can replace 4 screws, or all you...
57.50€ *
Delivery time: will be ordered / produced for you
Tönsfeldt 030440 4 TMV D-rings red Product number: 37459
4 TMV D-rings with brass on brass fine casting without screws in 6 colors powder-coated, galvanized or nickel-plated. Technical data D-rings: D-ring: Height: approx. 10.0 mm Width: approx. 8.2 mm Strength: approx. 2.0 mm Clamping mile:...
Content 4 Stück (7.25€ * / 1 Stück)
29.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Tönsfeldt 030441 4 TMV D-rings yellow Product number: 37460
4 TMV D-rings with brass on brass fine casting without screws in 6 colors powder-coated, galvanized or nickel-plated. Technical data D-rings: D-ring: Height: approx. 10.0 mm Width: approx. 8.2 mm Strength: approx. 2.0 mm Clamping mile:...
Content 4 Stück (7.25€ * / 1 Stück)
29.00€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Viewed