Top seller
No results were found for the filter!
NEW
Leimbach 0H511D hydraulic valve fastening set...
Product number: 38091
With the help of these fastening sets, the hydraulic valves can be adapted for the attachment of the individual servos. With the help of this set, the valves can be operated with the D-power servos AS/DS-218, AS/DS-225 (34261).
7.90€ *
Delivery time: will be ordered / produced for you
Leimbach 09452 "Tank" - fairing for 2-way...
Product number: 37988
"Tank" - fairing (for covering a standard control valve block) As an accessory for our model hydraulics, we offer a "tank fairing", which serves the control valve block attached to the side of the vehicle frame to make it a little less...
14.50€ *
Delivery time: will be ordered / produced for you
Leimbach 09453 "Tank" - fairing for 3-way...
Product number: 37989
"Tank" - fairing (for covering a standard control valve block) As an accessory for our model hydraulics, we offer a "tank fairing", which serves the control valve block attached to the side of the vehicle frame to make it a little less...
15.90€ *
Delivery time: will be ordered / produced for you
Leimbach 09455 "Tank" - fairing for 4-way...
Product number: 37990
"Tank" - fairing (for covering a standard control valve block) As an accessory for our model hydraulics, we offer a "tank fairing", which serves the control valve block attached to the side of the vehicle frame to make it a little less...
16.90€ *
Delivery time: will be ordered / produced for you
leimbach 09456 "Tank" - fairing for 6-way...
Product number: 37991
"Tank" - fairing (for covering a standard control valve block) As an accessory for our model hydraulics, we offer a "tank fairing", which serves the control valve block attached to the side of the vehicle frame to make it a little less...
18.00€ *
Delivery time: will be ordered / produced for you
leimbach 09458 "Tank" - fairing for 8-way...
Product number: 37992
"Tank" - fairing (for covering a standard control valve block) As an accessory for our model hydraulics, we offer a "tank fairing", which serves the control valve block attached to the side of the vehicle frame to make it a little less...
20.40€ *
Delivery time: will be ordered / produced for you
Leimbach EHS00101 Adjustment tool with stencil...
Product number: 37600
Only for use with our valves in normal size, order-no.: 0H5xx The adjustment tool is needed to re- adjust the neutral- position of an output from our control-valves. Also on the back the adjustment- tool has an integrated stencil for...
10.50€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Leimbach EHS00104 Adjustment tool with stencil...
Product number: 37601
Only for use with our valves in smaller size, order-no.: 0H4xx The adjustment tool is needed to readjust the neutral- position of an output from our control-valves. Also on the back the adjustment tool has an integrated stencil for...
10.50€ *
Delivery time: will be ordered / produced for you
Leimbach 01150 Controller for standard pump motors
Product number: 37602
Our hydraulic pumps are delivered with a normal direct current engine (Brush or "Brushed" engine) However, the use of forward/backward drivers available on the market may be problematic on our pumps, since this can never be defined...
31.90€ *
Delivery time: Ready to ship, appr. 2-5 workdays **
Leimbach 01134 pump-control-unit
Product number: 37603
The pump-control-unit automaticly switches the pump on if at least one of the monitoring channels is used. Therefore the unit learns/reads in the individual positions of the 4 Input channels everytime the unit / the model is swiched on....
74.50€ *
Delivery time: will be ordered / produced for you
Leimbach 01135 pump-mixer-module
Product number: 37604
Our pump mixer-module controlles the pump-speed depending on the modulation at the four inputs. Therefore the module generates a Signal for an (not included) ESC (electronic-speed-controller) at the output. The module can generate a...
74.50€ *
Delivery time: will be ordered / produced for you
Leimbach 09408T Leimbach wood crane Penz for...
Product number: 39849
PENZ charging crane (for Tamiya vehicles) Not suitable for Tamiya wooden transporter Volvo FH-16! From now on we also offer our short wood charging crane in a version generally for Tamiya vehicles. Among other things, the scope of...
3,498.00€ *
Delivery time: will be ordered / produced for you
Viewed