Graupner 33040

BIND UP TO 4 RECEIVERS AT A TIME

Bind up to four 2.4GHz receivers at the same time and define the division and distribution of the channels as you wish. As an example, a 6-channel receiver can be installed per wing and take over the control of the ailerons, brake flaps, landing gear and lighting. Then only the power supply has to be routed to the individual surfaces and you can start. No complicated cable routing and no expensive distributor is required! This ensures simplicity coupled with all the advantages of HF redundancy.

PERFECTLY MATCHED HARDWARE

The quadruple ball bearing stick units and with a resolution of the Hall sensors of 2400 steps (equivalent to a 0.5us servo pulse change) ensure a pure feeling of control over your model. The integrated 3-position switch offers easy switching of phases (levels), motor, auto trim or other user-definable functions. The aggregates also withstand bad weather conditions and are easily and conveniently accessible from the back of the transmitter in order to adjust them to your preferences. The transmitter can also be equipped with 4D sticks. However, one of the two 4D encoders is then connected in place of the upper cylindrical rotary encoder in the transmitter, which can instead be connected to any other free slot.
MC-32EX body
MC-32EX holder
MC-32EX switch2
MC-32EX sockets
MC-32EX switch

ERGONOMIC HOUSING

Did you expect a completely new design for the new mc-32 EX? The entire Graupner team unanimously decided against it without a long discussion! Because the design of our console transmitter was created in 2008 by a Swabian design office together with world champion pilots, which puts the full focus on the ergonomics of the transmitter. Every switch, every controller is in the perfect position, down to the millimeter, which was determined in numerous studies with model sport professionals. And for long-time mc users, the new mc feels immediately familiar in the hand. The mc-32 EX is encased in a sturdy aluminum frame. The switches, buttons and displays are in a high-quality plastic housing, which retains its pleasant feel even at extreme temperatures.

FULL POWER UP TO 10 HOURS

The mc-32 EX HoTT is equipped with a dual, redundant 2.4 GHz HF system. A circular patch antenna and a linear antenna ensure enormous signal quality and increased range. A long day of fun is made possible and allowed by the included 9000mAh LiPo battery

More than 10 hours of operating time! The battery is also replaceable for hardcore pilots. So if you can do without sleep, you can get by for a whole day with 2 battery charges. By the way: if you change the battery, it doesn't matter which way round the connector is plugged in. The mc-32 EX is protected against reverse polarity via the circuit board layout.

YOUR INDIVIDUAL TOUCH DISPLAY

The large 4.3 inch TFT touch color screen provides convenient, easy and quick access to all the functions you need to set your model perfectly for you. You always have everything in view! Even in direct sunlight, the display can be read perfectly. The highly optimized graphical user interface acts like your smartphone and gives you access to all menus and functions. Fast and clear, powered by a high-performance processor. Intuitive touch and swipe controls make navigating the menus quick and easy. Design your own up to 6 screens to display important information or generate menu shortcuts - all with a simple tap on the screen. The self-created widget pages can be switched using the left buttons and a freely programmed digital button or switch. The mc-32 EX HoTT contains over 100 widgets with which you can compose your screens as you like. - without programming on the PC! Fast - easy - intuitive. The menu can be set in the languages German, English, French, Italian, Dutch, Portuguese, Czech, Chinese and Korean.

EXPAND YOUR HORIZON WITH YOUR SMARTPHONE

Do you need more data at a glance? Much of our everyday life runs on the smartphone. We offer you the opportunity to integrate your smartphone into your RC experience. At the upper edge of the aluminum frame there is a metal bracket to which an optionally available smartphone holder can be attached. If your smartphone is safely used and connected via Bluetooth or USB cable, you can read important data during the RC action via the Graupner HoTT Viewer app. The smartphone is positioned on the transmitter in such a way that your eyes no longer have to deviate so far from your model. Due to the steep viewing angle of the mobile phone, the display is still easy to read even in direct sunlight. The optional mobile phone holder replaces the well-known mini display at the top edge of our old console transmitter generations. In practice and numerous tests with model builders, it turned out that this small display did not offer much added value. With your smartphone you get a larger, easier to read and more functional display.

ENORMOUSLY EXTENSIVE VOICE OUTPUT

Hear what's up! The mc-32 EX HoTT offers almost endless possibilities for configurable voice output for the telemetry system and the transmitter status itself. Switch positions, flight phases, warnings, vario tones, telemetry information, user-definable voice outputs and much more. The mc-32 EX starts interacting with you from the moment you turn it on, notifying you of incorrect stick or switch settings for the selected model. No surprises from retracting landing gear, revving up engines or incorrect gyro settings. If necessary, the mz-32 will even inform you if you have forgotten to extend your landing gear, you are about to go out of range or the battery voltage is getting dangerously low. These problems are a thing of the past! With over 600 installed language files, you get an unbelievable variety of possible combinations of voice outputs. If necessary, you can create as many of your own files as you like with a text-to-speech editor and use them however you like.

WIRELESS TEACHER / STUDENT FUNCTIONALITY

The future of our beloved hobby belongs to the offspring. It is important to carefully introduce young people and newcomers to model sports. For first RC attempts it is a good idea to support the new pilot with a second remote control to be able to help or intervene in an emergency. All of our Graupner transmitters can be connected to each other with a teacher/pupil function. And it's completely wireless!

ALWAYS UP TO DATE

Of course, as a mc-32 EX user, you will be provided with the latest functions and updates. Completely free! As soon as an update is available and your transmitter is connected to the WLAN, you will receive information on the transmitter display whether you want to carry out the new update at the push of a button. TIP: If you want to carry out an update, it would be advisable to ensure that you have sufficient battery capacity or a direct power supply. However, if your transmitter runs out of juice during the update, that's not a problem either. The update can be continued at the same place.

FAST HELP

Do you need help during programming or with settings? You don't need thick manuals or hours of searching on the internet! The mc-32 EX offers you help right where you need it. Each menu and option has its own help text available directly on the screen. Tap on the question mark and you will get the appropriate help and support. You want other help texts? The texts can easily be adjusted or extended. The mc-32 EX is there for you and gives you the opportunity to do what you want and love to do. Connectivity that takes you further!

Hardware characteristics

• Aluminum stick units with 4 ball bearings and Hall sensors and a resolution of (12-bit) 2400 steps or 0.5us servo pulse for precise control
• Adjustable mode and spring forces of the sticks by simply opening the back panel, without screws.
• Sun-readable 4.3 inch color TFT touch display
• 2 redundant 2.4 GHz HF modules
• A circularly polarized patch antenna and a transversely installed antenna with adjustable radiation angle
• 9000mAh 1S3P LiHV battery for transmitter operating times of approx. 10 hours
• USB type C connection with charging function, PC interface (e.g. for updates, flight simulators, etc.), USB joystick function, mass storage function
• Headphone jack
• WLAN-enabled: for firmware updates
• Bluetooth-enabled (e.g. for Bluetooth headphones or Android™ HoTT Viewer smartphone app)
• Wireless teacher-pupil function and DSC socket for teacher-pupil operation
• User-definable data socket for external modules, e.g. B. Crossfire or ELRS module
• Internal 16GB SD card
• mp3 and wav player
• Loudspeaker for voice messages and telemetry announcements
• User-definable haptic feedback (vibration alert)
• 4 x 3-way toggles, 2 x 3-way toggles/pushbuttons, 2 x 2-way toggles, 4 x proportional encoders, 2 x side encoders, 3 sliders, 8 user-definable digital buttons, 6 navigation buttons
• Optional smartphone holder available

Features of the Software

• 32 proportional control channels
• 64 user-definable digital switches
• 999 model memories
• Extensive voice output
• Binding of up to four receivers for channel expansion (max. 32 channels and 64 digital switches). The selected receiver sends the telemetry data.
• Channel 16 switchable telemetry
• Servo frequency 10ms or 20ms for analogue servos
• Model specific, group or global binding mode
• Model types: model aircraft, helicopter, multicopter, vehicle, boat
• 12 customizable phases (levels) each with 16 free mixers (total 192 mixers)
• 8 wing types, 6 delta wing types, 3 tail types
• Multi-motor control (4)
• 6 user-definable display pages with numerous selectable widgets
• Context-related help texts can be called up easily via "?"
• Servo balancing
• 8 phase dependent trim functions and 5 trim types
• 6 phase-dependent, adjustable clocks
• 8 phase dependent quad rate and expo settings
• 16 phase dependent curve mixers
• 8 dual mixers
• 3 channel sequencer
• 3 ring limiters
• 12 combination switches programmable from up to four switches
• 12 logical switches
• 12 sensor switches (digital or linear output)
• 4 snap-roll mixers
• 8 wing and tail mixers
• 8 assignable and configurable system alerts
• 8 assignable and configurable user alerts
• 8 each assignable and configurable global and phase dependent encoder announcements
• 8 each assignable and configurable global and phase dependent voice announcements
• Vario and control menu with dead zone setting
• Wireless, real-time tuning of receivers, telemetry, and flight controllers
• Integrated file manager

Maximum security

• Extremely long range
• FHSS, frequency hopping over up to 75 channels
• Maximum immunity to interference through optimized frequency hopping, wide channel spread and antenna diversification
• Intelligent data transfer with correction function
• Range test and warning function
• Low voltage warning
• Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
• Numerous fail-safe functions

Highest precision

• Shorter reaction times can be set (10ms period time)
• No additional delays caused by module processors. The entire hopping management is carried out directly by the 32-bit main processor.
• Synchronous servo operation possible through simultaneous activation of the servo outputs in blocks of four

Unique pilot feeling

• Largely instantaneous control responses through direct processing
• Telemetry evaluation in real time
• Wireless teacher/student functionality

Technical specifications

• Channels: 32, 8 of which can be trimmed
• Switching functions: 64
• Model memory: 999
• Dimensions approx.: 275 x 260 x 155 mm (without hand rests)
• Weight approx.: 1700 g (with battery)
• Frequency: 2400 ... 2483.5MHz
• Modulation: 2.4GHz FHSS
• Transmission power: 100mW EIRP
• Range: about 5000 m
• Current consumption: 500 – 1200 mA
• Operating voltage: 3.6V to 4.35V
• Temperature range: -10 to +55°C

scope of delivery

• mc-32 HoTT transmitter
• 9000mAh LiHV transmitter battery
• USB Type-C charging cable
• USB adapter for receiver and sensor updates
• Transmitter strap
• Aluminum case