Beier electronic SFR-1 ESC with sound (excl. DVD)

The SFR-1 at a glance:

• Combination of sound module, speed controller and light control unit
• Much easier connection and easier programming than with separately sound module and speed controller
• Suitable for all types of RC models with one motor and a commercial remote control
• Individually programmable and suitable for all model types
• For brushed and bell-armature DC motors
• Supply voltage: 6 - 18 V
• Max. motor current: 30 A
• Powerful BEC with 5,6 V, 3 A
• Inclusive 700 sound files for speed dependent motor, additional and random sounds
• Use of own recordings and songs possible
• Powerful built-in amplifier for optimal sound quality
• 6 proportional inputs to control sound, speed controller, light and servo functions
• Up to 16 channels via the sum signals S-Bus / SUMD
• 16 switching outputs for LEDs, lamps, smoke generators, relays, etc.
• Free programmable light and sound sequences
• 2 programmable servo outputs to control additional movements and mini speed controller
• Adjustable speed control functions: load regulation, cruise control, mass and steering inertia and different brake functions

Description

The SFR-1 is a multifunctional module and combines the sound module USM-RC-2 and the
speed controller UFR-1230 in one unit. It comes with a large light control unit, three servo outputs and an infrared port for the light module SM-IR-16-2, to transmit light signals to a trailer.

The SFR-1 is suitable for all types of RC standard transmitter. With the various setting options the SFR-1 can be easily adjusted to all model requirements and driving behaviours. For an easy start we have more than 140 ready to use sound projects and 700 sound files for various model types. Of course, own recordings can be used, as well.

Sound functions:

For an authentic sound of the model, sounds can be selected for following areas:

• Driving and engine sounds for one motor (speed-dependent)
• Additional sounds (e.g. horns, hydraulic and compressed air noises)
• Random sounds (e.g. squeaking, animal and ambient sounds)

Driving functions:

One brushed and bell-armature motors (DC) can be controlled smooth and realistic with the SFR-1. An ideal driving behavior can be achieved through a large number of settings.

The speed controller on the SFR-1 has following characteristics:

• Cruise control functions
• Different brake functions (with hand- and emergency brake)
• Adjustable load regulation
• Adjustable mass inertia
• Steering inertia (with adjustable steering ankle limits)
• Adjustment of throttle curve for different driving behaviors

Light functions:

To realize different light effects, the SFR-1 has 16 switching outputs to connect LEDs, lamps, smoke generators and other consumers. Light functions, such as low beam, rear light, brake light, indicator lights, warning lights, flickering lights, etc. can be easily implemented and controlled.

All light functions can be activated or deactivated manually with a proportional channel or with nautic/multiswitche modules and automatically by sounds and movements.

The SFR-1 has a special infrared port to connect the IR transmitter diode for the light module SM-IR-16-2.

Servo movements:

With two additional servo outputs, movements can be synchronised to the played sound

Technical data

• Supply voltage (Ub):  6 – 18 V DC
• Power consumption:  Quiescent current: approx. 1 mA
• Standby current (sound, motor and outputs off): approx. 80 mA
• Motor current:  max. 30 A continuous current, 60 A short time (1 minute)
• BEC voltage:  5,6 V
• BEC current:  max. 3 A continuous current, 5 A short time (10 seconds)
• Proportional inputs:  6 channels (1,000 - 2,000 ms)
  Supported protocols:
• PPM / PCM (1,000 - 2,000 ms)
• Sum signal S-Bus (max. 16 channels)
• Sum signal SUMD (max. 16 channels)
• Nautic / Multiswitch / Multikanal / EMS
• Servo outputs:  3 outputs (1,000 - 2,000 ms)
• Servo output for steering
• Servo output 1
• Servo output 2
• Switching outputs:  16 outputs (npn – open collector), max. 1,5 A per output, the total current of all outputs is not allowed to exceed 3,0A
• NF amplifier:  20 W
• Loudspeaker:  4 - 8 Ohm
• Volume setting:  With extra poti (100 kOhm) and/or by the radio
• Memory for sound files:  Micro-SD-card (1 bis 32 GB)
• May. length of sound:  approx. 180 minutes per1 GB
• Supported sound files:  WAV-format, 8/16 Bit, Mono/Stereo, 22/44 kHz
• Sound output:  16 Bit, Mono, 44 kHz
• Number of possible sounds:  
• 5 running steps/gears (internally in up to 255 steps accelerated)
• 8 change sounds between the running steps/gears
• Turn on noise, turn off noise, starting noise, stopping noise, idling noise, brake noise, reverse engine noise, curve squeal, flashing lights sound
• 30 additional sounds (for example via prop.-channels)
• 8 random sounds (random generator)
• 30 tracks for WAV-Player
• Random sound generator:  Times between 1 to 999s adjustable
• Additional ports:  
• Programming interface for data cable
• Port for infrared diode of light module SM-IR-16-2
• Protection features:  
• Short circuit protection at motor output stage
• Short circuit protection at switching outputs
• Short circuit protection at BEC
• Temperature monitoring
• Battery voltage monitoring
• Protection while switching on power supply
• Failsafe for proportional inputs
• Cables for connection:  
• For battery: 2 x 1,5 mm², length approx. 15 cm (with Deans T female connector)
• For Motor: 2 x 1,5 mm², length approx. 15 cm
• For receiver: servo patch 3 x 0,14 mm², length approx. 30 cm
• Permissible ambient temperature:  0 – 60° C
• Permissible relative air humidity:  Max. 85 %
• Size:  80 x 47 x 23 mm
• Weight:  86 g

Caution: To edit sound projects and to change settings on your sound speed controller, you need the DVD with the "SFR-1 Sound-Teacher"!
Only order your sound module without DVD when you already have the SFR-1 DVD with the matching Sound-Teacher.
The Sound-Teacher of other modules (e.g. USM-RC-2, USM-HL-2) is not working with the SFR-1.

Included in delivery:

• Soundfahrtregler SFR-1
• 2 servo patch cable (30 cm) to connect RC-receiver
• 1 cable (25 cm) for loudspeaker
• 1 cable (25 cm) for standby swith or volume potentiometer
• 1 Flat ribbon cable (40 cm) to connect switching outputs
• Micro-SD-card (4 GB) + adapter
  
  Optional:
• DVD-ROM with software (Sound-Teacher) and sounds
• Operating manual (printed only in German - the English and French version are on the DVD)

Recommended accessories:

• Loudspeaker: LS-4R-10W-50, LS-4R-25W-90, LS-8R-8W-50 or LS-8R-15W-67
• More Servo patch cables
• Data cable K-USB-2
• Flat ribbon cable
• Connection terminal AKL-8 or AKL-8-W
• Infrared light module for trailer SM-IR-16-2
• Battery adapter cable for batteries with Tamiya or XT60 plug connection